K-FLEX IN CLAD SYSTEM
K-FLEX IN CLAD SYSTEM combines closed-cell elastomeric foam insulation with a flexible, 1 mm-thick polymeric covering. Engineered for demanding marine applications, the system provides long-lasting resistance to UV radiation and water vapour.
Its flexible construction adapts easily to insulated pipework, creating a durable, consistent finish.
Technical specifications
MATERIAL DESCRIPTION
Flexible polymeric barrier combined with elastomeric insulation
TEMPERATURE RANGE
K-FLEX IN CLAD SYSTEM tube: from -200°C (-328°F)
IN CLAD System with K-FLEX ST tested at -163°C (-260°F) and approved with a statement of feasibility by DNV °C to +105°C (221°F) IN CLAD with K-FLEX ST
120°C (248°F)IN CLAD with K-FLEX ECO °C
IN CLAD System with K-FLEX ST tested at -163°C (-260°F) and approved with a statement of feasibility by DNV °C to +105°C (221°F) IN CLAD with K-FLEX ST
120°C (248°F)IN CLAD with K-FLEX ECO °C
MARINE APPROVALS
CE Marine Mark Approved (MED)- BV
DNV LNG Statement of Feasibility
Type approval by American Bureau of Shipping - ABS
Type approved by Det Norske Veritas
Type approved by Lloyd’s Register
DNV LNG Statement of Feasibility
Type approval by American Bureau of Shipping - ABS
Type approved by Det Norske Veritas
Type approved by Lloyd’s Register
UV RESISTANCE
Extremely good - 2 years of exposure in New River, Arizona (USA) as per ASTm G 7-97, no pitting, no cracking, no blistering
ARE YOU INTERESTED IN THIS PRODUCT?
Check our General Catalogue for the complete technical information
ELONGATION AT BREAK
>100% (ISO 3). Typical values: elongation at 70%, elongation to break 300%
TENSILE STRENGTH
>=6,9 MPa (ISO 37). Typical value 7,5 MPa
THICKNESS
1.2 mm (± 0.2)
FIRE PROPAGATION
BS 476 p6 - class 0
FIRE REQUIREMENTS FOR SHIPBUILDINGS
Pass (IMO 61/67 part 2&5)
MODULUS 10%
1,5 MPa (ISO 37)
PEEL ADHESION
>50 KPa (ISO 2411)
SPECIFIC WEIGHT
1,8 (± 0.1 g/cm3)
Contact us for more information about this product
