Find your product

Isocalc software

The IsoCalc program is designed to perform thermal calculations using engineering fundamental heat flux formulas and application specific input data. The program is used to determine which product it is better to apply on pipes, ducts and large vessel applications.

FEATURE OF THE ISOCALC SOFTWARE

Thickness to prevent condensation

Heat Loss/Gain

Surface and OutletTemperatures

Cost to Operate System/Energy Savings

Time to Freeze

Download

K-Flex isocalc software

Typical input data which may be required for above calculations are: Fluid temperature, Ambient Temperature, Pipe Size, Relative Humidity, Length of Pipe, and Flow Rate. Thermal k-values for the insulation products offered have been pre-selected. Note: information must be entered in all input fields for the program to operate. If a given condition data point is not known, i.e. relative humidity, the program can be run using different conditions and the options presented to the end user for final insulation thickness selection. Several factors must be considered when determining operating conditions. For condensation control, "design" operating conditions should be selected. In other cases, efficiency (optimum pay-back) may be considered. The icon selections will allow you to quickly navigate through the various operations of the program. This software can be used on the MS Windows operating system.