K-FLEX 1120 WATER BASED ADHESIVE
K-FLEX 1120 Water Based Adhesive is a high performance water-based, one-part adhesive formulated for fast bonding and long term heat resistant bonds. It meets South coast Air Quality Management Rule 1168 (SCAQMD) and LEED (Leadership in Energy and Environmental Design) IEQ 4.1, 4.5 and 4.6 VOC emission regulations.
Technical specifications
COLOR
Neutral
COVERAGE
Typical Coverage (@ 2.5 dry g/ft2) ~720 ft2/gallon (to single surface)
DENSITY
8.0 - 9.0 lbs per gallon
FLAMMABILITY
Non-flammable in the wet state.
SHELF LIFE
12 months from date of shipment when stored at recommended temperatures in the original, unopened container.
SOLIDS CONTENT
46 - 51%
STORAGE TEMPERATURE
60°F - 80°F. Higher temperatures reduce normal storage life. Lower temperatures cause increased viscosity of a temporary nature. This water-dispersed adhesive will become unusable with prolonged storage below 40°F. Protect from freezing.
SUGGESTED APPLICATION METHOD
Brush, Roll or Spray
VISCOSITY (APPROXIMATE)
400 - 1000 cps (Brookfield RVF #3 sp at 30 rpm, room temperature)
VOC (VOLATILE ORGANIC COMPOUNDS) CONTENT
0 g/l Test Method: calculated SCAQMD rule 443.1
Meets Requirements for LEED™ EQ Credits & SCAQMD 1168
Meets Requirements for LEED™ EQ Credits & SCAQMD 1168
ARE YOU INTERESTED IN THIS PRODUCT?
Check the documentation for complete technical information
BASE
Acrylic Emulsion
Contact us for more information about this product